Monday, May 30, 2011

ABOUT SEIKO DIVERS 6309-7290/729A/729B


HISTORY:

The Seiko 6309 series of diving watches is the third generation of Seiko’s (normally aspirated) professional/recreational diving watches (this does not include Seiko’s deep diving shrouded divers). The 6309 line of divers replaced the 6105 in 1976 and ran until 1988, when it was replaced by the 7002 line of divers. The 6309’s are largely an economizing and further modularization of the 6105 movement, which allowed for greater robustness, longetivity and ease of maintenance. The 6309’s (especially the second generation of them) introduced many design changes to Seiko divers that are with us to this day.

- The 6309 divers come in two case variations: an earlier “cushion-cased” variant produced from 1976 to 1988 and a later “slimed-down case” variant produced from 1982 to 1988. As you can see production of the first generation continued after the second generation was introduced, and overlapped the second generation models, though in reduced number.



6309-7290/729A/729B:

The second generation of 6309’s abandoned the cushion style case in favor of a revised round “slimed-down” case-style, which continues to be used almost unchanged by Seiko’s basic line of divers to this day. Other than the case, there are not many differences between the two generations of 6309’s. Besides the case, the only other differences worth noting were in the style of the dial. According to the Seiko Diver’s reference, the slimed down models were as follows:

- 6309-7290: first model to use slimmed-down cases, black-bezel version
- 6309-7290 with "17 JEWELS" written above 6:00 on the dial: Japan-made version, with black bezel
- 6309-729A: identical to 6309-7290 except with blue and red “Pepsi” bezel
- 6309-729A with "17 JEWELS" on dial: Japan-made version, with blue and red “Pepsi” bezel
- 6309-729B?: very rare orange dialed model.
  

6309-7290
CASE:
6309-729A

This generation comes in a smaller and thinner stainless steel case measuring approximately 41mm in width (47mm including the crown); 45mm in length (lug to lug); 13mm in thickness; and 22mm in lug width.

The main difference between the cushion style and the slimmed-down cases is that the slimmed-down cases do away with the excess metal protruding from the case, outboard of the bezel edge, making the watch appear thinner. These cases also incorporate a small blister shaped guard which protects the crown and is somewhat reminiscent of the much larger guard found on vintage 6105 divers. Otherwise, both generations see little by way of physical changes.

 


DIAL:

The faces of this version are characterized by rectangular hour markers at 1,2,4,5,7,8,10 & 11; Larger rectangular hour markers at 6 & 9; a two-piece pointed triangular 12:00 marker that is divided by a line; and a tiny rectangular 3:00 marker just to the right of the day/date window. All hour markers are lumed. However, it must be noted that the lume is relatively flat and does not occupy the entire hour marker.

All second generation 6309’s have the words SEIKO AUTOMATIC written in whitish silvery paint one above the other, directly below the 12:00 marker; and the words WATER150mRESIST just above the 6:00 marker. Unlike first generation 6309’s the Suwa symbol is not prominently displayed on the dial. It is worth noting that in original condition, the words WATER & RESIST where painted red, while the 150m was painted in whitish silver paint. However, over the years the red color tends to fade, turning anywhere from orange to yellow over time (don’t stress too much about finding them in perfect red condition). Below the 6:00 marker, stretching as far as between the 7:00 & 5:00 markers is written in tiny letters, the dial code. These dial codes tell us where the dial was made and what market the watch was originally destined for, be it Japan, the Americas, or everybody else (Arabia, EAU, etc.). There are two different dial codes for this variant and they correspond with the last two dial codes mentioned for the 7040/7049, above. In addition another dial code, also made in Singapore, but for a market other than America reads:

“6309-735M R” (with a very small Suwa symbol at the right)

Attention MUST be paid to the size of the Suwa symbol, as reproduction dials have a slightly larger symbol.



6309-729A


It’s worth mentioning that in the 6309-729B dial, besides it’s being orange, the words WATER & RESIST are blue, not red. The words SEIKO, AUTOMATIC, 150 and the dial code are written in black. 

12 comments:

  1. I recently purchased a Seiko 6309-729A 150M Divers watch with the yellow face. It claims to be authentic and will will include proof of authenticity.

    I cannot find any information about this watch that mentions the yellow face!? Only Orange, Black and a third, which I cannot remember at this time.

    Can you help me find information that confirms this fourth color?

    Thank you in advance for your help.

    Sincerely, Rick

    ReplyDelete